The Causes of Oversteer, How to Deal With it, and Tips to Avoid it

Oversteer is a condition in which a motorized vehicle loses traction on the rear or front wheels when crossing a bend or changing direction. In the case of oversteer, the rear of the vehicle moves in a wider direction or slides outwards, exceeding the angle of rotation desired by the driver.

Oversteer occurs when the rear wheels lose traction, usually due to too much lateral force that exceeds the grip of the rear wheels on the road. This can be caused by a number of factors, including too high a speed entering a corner, accelerating too hard on exiting a corner, or an unequal load distribution between the front and rear wheels.

Oversteer can be dangerous if not properly controlled, because the vehicle can lose control and have the potential to skid or even flip over. To overcome this condition, the driver needs to respond quickly and precisely, such as directing the steering wheel towards a bend or compensating with the opponent’s steering wheel to restore traction on the rear wheels or reduce acceleration gradually. For more details, you can read the following TransTRACK article!

Cause of Oversteer

Here are some common causes of oversteer in vehicles:

Speed is too high

Entering a corner at too high a speed is the main cause of oversteer. Excessive speed can cause too much lateral load on the wheels and loss of traction.

Excessive acceleration

Giving gas too hard when exiting a corner can make the rear wheels lose traction. This often occurs in high-torque or rear-wheel drive motor vehicles.

Unbalanced load distribution

If the vehicle load is not evenly distributed between the front and rear wheels, oversteer can occur. For example, if the rear load is too heavy due to passengers or loads in the back of the vehicle.

Unadjustable suspension

Improperly adjusted suspension or bad adjustments can cause oversteer. This can happen if the rear suspension is too hard or too soft, or if the shock absorber settings or suspension geometry are not correct.

High center of gravity position

Vehicles with a high center of gravity, such as SUVs or tall trucks, tend to have a tendency to oversteer due to lower lateral stability.

Bad road conditions

Uneven, slippery or bumpy road surfaces can reduce wheel traction and cause oversteer.

Bad tire settings

Use of inappropriate tires or uneven wear on tires can affect traction and lead to oversteer.

It is important to properly control oversteer when it occurs. Quick responses and proper driving techniques, such as steering into a corner or gradually reducing acceleration, can help overcome oversteer and restore control.

How to Overcome Oversteer

Overcoming oversteer is an important driving skill that can help you maintain control of the vehicle when the rear wheels lose traction. Here are some steps that can be taken to overcome oversteer:

Keep Calm and Don’t Panic

 Calm response is very important when facing oversteer. Don’t be surprised or panicked, but stay calm and focus on the steps you need to take to control the vehicle.

Move the View in the Desired Direction

Notice the direction you want to go and shift your gaze to that point. This helps your brain focus efforts on directing the vehicle in the desired direction.

Reduce Acceleration or Release the Gas

If oversteer occurs when you gas too hard on your way out of a corner, the first step is to reduce acceleration or completely release the gas. This will help restore traction to the rear wheels and reduce lateral friction that causes oversteer.

Handle the Steering Smoothly

Turn the steering wheel gently and slowly in the desired direction to balance the vehicle. Do not make sharp or excessive steering movements, as this could aggravate the situation and cause the steering wheel to turn.

Use Gas Control Techniques

After you’ve decelerated or released the gas, use throttle control techniques to restore traction to the rear wheels. If you feel the rear wheels are losing traction, slowly add gas to gradually restore traction. This helps prevent the rear wheels from slipping suddenly and improves control over the vehicle.

Be careful with the Brakes

Avoid hitting the brakes hard when facing oversteer. Sudden braking can cause the rear wheel to slip further and exacerbate oversteer. If necessary, brake gently and slowly to help stabilize the vehicle.

Practice and Exercise

Overcoming oversteer is a skill that requires practice and experience. If possible, get special driving training or practice these techniques in a safe area, such as a parking lot or closed circuit, with proper supervision.

Always remember that prevention is key. Driving sensibly, following recommended speed limits and keeping the vehicle in good condition are all important steps to prevent oversteer and ensure road safety.

Tips for Avoiding Oversteer

Here are some tips to avoid oversteer while driving:

Pay Attention to Speed

Driving at an appropriate speed is key to avoiding oversteer. Keep your speed within the set speed limit and road conditions. Avoid entering corners at too high a speed, especially in wet or slippery road conditions.

Bend Planning

Before entering a bend, look ahead and evaluate the bend. Know the angles and bend radius to anticipate them well. By having good planning, you can reduce the risk of oversteer.

Control Acceleration

Avoid giving gas suddenly or too hard when exiting corners. Aggressive acceleration can cause the rear wheels to lose traction. Accelerate slowly and steadily when leaving corners to maintain vehicle stability.

Balanced Load Distribution

Make sure the vehicle load is evenly distributed between the front and rear wheels. If possible, distribute loads on the vehicle evenly so that the weight is properly distributed. This helps maintain traction on all wheels and prevents oversteer caused by unbalanced loads.

Check Suspension and Vehicle Geometry

Make sure the vehicle’s suspension is in good condition and properly adjusted. Inspect and ensure shock absorbers, springs and suspension geometry conform to manufacturer specifications. Poor adjustments or worn components can affect traction and vehicle stability.

Choose the Right Tire

Choose tires according to your conditions and needs. Tires that wear evenly and have good grip on various road conditions can help reduce the risk of oversteer. Make sure the air pressure in the tires is also in accordance with the manufacturer’s recommendations.

Practice and Experience

Safe and skilled driving requires practice and experience. Practice driving in various road conditions and learn how your vehicle behaves in different situations. With experience, you will be more adept at anticipating and dealing with oversteer situations when they occur.

Always pay attention to the road, weather and traffic conditions around you. Keep a safe speed, and pay attention to road signs and markings that give clues about upcoming bends. By following these tips and driving sensibly, you can reduce the risk of oversteer and keep your vehicle stable and under control.

The Difference Between Oversteer and Understeer

Oversteer and understeer are two different conditions related to the loss of traction on the wheels when the vehicle is going around a bend or making a change of direction. The main differences between the two are as follows:

Oversteer

• Oversteer occurs when the rear wheels lose traction, and the rear of the vehicle begins to slide in a wider direction or slide out.
• In oversteer conditions, the vehicle’s turning angle is greater than the rotation angle desired by the driver.
• Oversteer tends to occur in vehicles with rear-wheel drive or vehicles with excessive rear load distribution.
• Oversteer is often caused by excessive acceleration when exiting a corner or entering a corner at too high a speed.
• Overcoming oversteer usually involves precise steering control, controlling acceleration, and restoring traction to the rear wheels.

Understeer

• Understeer occurs when the front wheels lose traction and the vehicle does not enter a bend at the desired angle.
• In understeer conditions, the vehicle’s turning angle is smaller than the rotation angle desired by the driver.
• Understeer generally occurs in motorized vehicles with front-wheel drive.
• Understeer is often caused by too high a speed entering a corner, loss of grip on the front wheels, or excessive braking in a corner.
• Overcoming understeer involves easing the acceleration, releasing the brakes, or steering more sharply to restore traction to the front wheels.

These two conditions have different characteristics and causes, and the responses needed to treat each are different. A trained driver must be able to identify whether a vehicle is experiencing oversteer or understeer and take appropriate action to resolve the situation.

In dealing with oversteer while driving, it is important not only to rely on good driving skills, but also to keep the vehicle in the best possible condition. Paying attention to regular vehicle maintenance can help prevent oversteer caused by worn or malfunctioning components.

That way, using the Vehicle Maintenance System from TransTRACK is one of the best maintenance options for your vehicle. This vehicle maintenance system is designed to help users monitor and manage their vehicle maintenance schedule.

By using the Vehicle Maintenance System from TransTRACK, you can keep your vehicle in prime condition, reduce the risk of oversteer caused by technical problems, and improve driving safety.

Feel free to visit the TransTRACK website and find out more about their vehicle maintenance system. Make vehicle maintenance a priority and hit the road with greater confidence!

Topic